How to pair Sony WH 1000XM4 with an iPhone is a common question. Many people like the sound quality of the Sony WH 1000XM headphones, but don’t know how to use them with their iPhone. In this article, we will show you how to do it. 

These headphones are some of the best on the market, and they offer great sound quality and noise cancellation. 

In this article, we will show you how to pair them with your iPhone so that you can start enjoying your music right away!

Sony WH 1000XM4

The Sony WH 1000XM is a high-end pair of headphones that was released in late 2018. They are the successor to the popular Sony WH 1000X M series, and they offer some great improvements over their predecessors. 

One of the biggest changes is the addition of ANC (active noise cancellation) technology, which helps to cancel out any unwanted noise and make your music sound louder and clearer.

Some of the features Of Sony WH 1000XM4 include:

• ANC (active noise cancellation)
• Bluetooth connectivity
• 30 hours of battery life
• Touchpad control panel

Design Of Sony WH 1000XM4

The Sony WH 1000XM are a bit on the large side, but they’re still comfortable to wear for extended periods of time. The ear cups are made from soft leather and have a snug fit, and the headband is adjustable so that you can find the perfect fit.

There are a few headphones on the market that can rival the Sony WH 1000XM, but they tend to be quite a bit more expensive. Some of our favorites include the Bose QuietComfort 35 II and the Beats Studio III.

The Sony WH-1000XM also have a transparency mode, which allows you to hear your surroundings while you’re wearing the headphones. 

This can be useful for times when you need to be aware of your surroundings, such as when you’re walking around in a city or crossing the street.

How Do You Put WH-1000XM4 In Pairing Mode?

To put the Sony WH 1000XM in pairing mode, you need to hold down the power button for about two seconds. 

The LED light on the headphones will start flashing, and you can then proceed to pair them with your iPhone.

The Sony WH 1000XM also offers a range of customization options, which you can access by using the touchpad control panel on the right ear cup. You can adjust the level of noise cancellation, change the sound profile, and more.

How Can I Reset My Sony WH 1000XM4?

If you ever run into any problems with your Sony WH 1000XM, you can reset them by holding down the power button for about ten seconds. This will reset the headphones to their default settings and remove all of your customized preferences.

How To Pair Sony WH 1000XM With An iPhone?

There are two ways to pair your Sony WH 1000XM with an iPhone: through Bluetooth or NFC. Let’s take a look at each one separately.

How To Pair Sony WH 1000XM With An iPhone Via Bluetooth

Step One: Make sure that both devices are turned off.

Step Two: Hold down the power button on the left ear cup of the headphones until the blue light starts flashing.

Step Three: Turn on your iPhone and open the Settings menu.

Step Four: Tap on Bluetooth, then tap on “Sony WH 1000XM.” The headphones should now be paired with your iPhone.

How To Pair Sony WH 1000XM With An iPhone Via NFC

Step One: Make sure that both devices are turned off.

Step Two: Hold down the power button on the left ear cup of the headphones until the blue light starts flashing.

Step Three: Touch your phone to the NFC logo on top of the right ear cup of the headphones.

Step Four: The headphones should now be paired with your iPhone.

How To Use Sony WH 1000XM With An iPhone?

Once the headphones are paired with your iPhone, you can use them to listen to music, make phone calls, and more. Here are a few tips on how to get the most out of your Sony WH 1000XM:

When listening to music, make sure that the “Ambient Sound” setting is turned off. This will ensure that you only hear the music and not any outside noise.

• You can control playback and volume levels by using the buttons on the left ear cup of the headphones.
• To answer or end a call, press either button on the right ear cup.
• To mute or unmute a call, press and hold the button on the left ear cup.

The benefits of using Sony WH 1000XM4 headphones with an iPhone are numerous. The sound quality is impeccable, and the headphones are very comfortable to wear for extended periods of time. 

In order to take full advantage of these features, it is important to know how to pair the two devices correctly.

Troubleshooting Tips For Connecting Sony WH 1000XM4 Headphones To An iPhone:

There are a few reasons why your Sony WH 1000XM might not be connecting to your iPhone. The most common reason is that the headphones and phone are not in close proximity to each other. 

• Make sure that both devices are within range of each other, and try moving them closer together if necessary.
• If the headphones are not connecting to your iPhone, make sure that both devices are turned on and that Bluetooth is enabled on your iPhone.
• Another possibility is that you might need to update the firmware on your headphones. 

To do this, go to Settings > Bluetooth on your iPhone, find the Sony WH 1000XM in the list of devices, and then tap on the “Update” button.

• If you’re having trouble connecting via NFC, make sure that the NFC antenna is in good condition and try holding your phone closer to the headphones.
• Make sure that you have the latest version of iOS installed on your iPhone.

How To Adjust The Sound Settings On The Sony WH 1000XM4 Headphones:

• Open the Settings menu on your iPhone and tap on “Bluetooth”.
• Under “Sony WH 1000XM,” you’ll see a list of options that include “Volume Limit,” “Noise Cancellation,” and more. You can adjust these settings to suit your preferences.

Conclusion

The Sony WH 1000XM are some of the best headphones on the market, and when paired with an iPhone, they provide an unbeatable listening experience. 

With great sound quality, ANC technology, and 30 hours of battery life, these headphones are sure to please even the most discerning listener. Thanks for reading!